DM 1901 silver Flame retardant reflective tape

silver flame retardant reflective fabric Color:siliver Specification:100CM width Fabric backing:100% aramid fiber

Production Name: silver flame retardant reflective tape

 Item No:DM1901

 Color: silver

Specification: 100CM width Can be die – cutting band-cut and guillotined

 Fabric backing: 70% aramid fiber 30% Polyester

Retroreflective Performance

   The coefficient of retroreflection (RA, in cd/lux/m2) of DM®Reflective Material is measured by methods based on either of the following retroreflective intensity testing procedures:

 

Production Name	Day Color	Initial average (RA )	Minimum  (RA )
DM 1901 Silver Fire retardant reflective tape	silver	450 cd/lux.m	330 cd/lux.m

The RA values listed in the following tables were measured at +5.0° entrance and 0.2° observation angles.

 

TUV Certification and Report

          

 

Physical Performance

 

 

Physical Performance	Test Method	Approved Products
Abrasion RA≥100	EN530:1995 Method 2 5000 Cycle	Listed Under Product Certification-ANSI/ISEA 107-2010  9.4.1
Flexing RA≥100	ISO 7854:1997 Method A 7500 Cycles	Listed Under Product Certification -ANSI/ISEA 107-2010  9.4.2
Cold Fold RA≥100	ISO 4675:1990 -20°C(-4°F)	Listed Under Product Certification -ANSI/ISEA 107-2010  9.4.3
Temperature Circle RA≥100	12 Hours 50°C(122°F) 12 Hours -30°C(-22°F)	Listed Under Product Certification -ANSI/ISEA 107-2010  9.4.4
Wash RA≥100	ISO 6330:2000 Method 2A 50°C(122°F) Number of cycles Listed	Listed Under Product Certification -ANSI/ISEA 107-2010
Dry-Clean RA≥100	ISO 3175:2000 Method 9.1 Number of cycles Listed	Listed Under Product Certification -ANSI/ISEA 107-2010
Wet Reflectivity RA≥100	ANSI/ISEA 107-2010 9.4.6 Appendix A	Listed Under Product Certification -ANSI/ISEA 107-2010
Flame Spread	EN11612 4” Char length	Listed Under Product Certification - EN11612
Heat Resistance	EN11612 260°C(500°F)	Listed Under Product Certification - EN11612
Convective Heat RA≥100	10Mins 140°C(285°F)	Listed Under Product Certification - EN11612

 

Inspection before shipment

 

1) Brightness testing

testing angle choice

Observation angles(o.A): 0.2°  0.33°  1°  1.5°

Entrance angle(E.A):  5° / 20° /30° /40°

 

2) Washing  Circle/Dry circle/ Washing shrinkage testing

Production Name	Washing Circle	Dry Circle
DM1901 silver Flame retardant reflective tape	25	5

Performance

 

While use of DMReflective Material enhances visibility, no reflective material can guarantee absolute visibility, particularly in adverse weather conditions. Performance will vary depending upon actual use, exposure conditions and maintenance. Customers should be aware that DM reflective material product portfolio that offers a range of product attributes and users should test the reflective material on their finished garments to satisfy conformance to their own requirements.

 

Application Instructions

 

Whenever two or more pieces of DM  Reflective Material – Fabrics are used together on a single surface or as a set, they should be matched to ensure uniform daytime color and nighttime reflectivity. All high visibility safety garments should be constructed in accordance with the appropriate standard(s).

Cutting – Die-cutting is recommended, although it can also be hand-cut or guillotined.

Sewing – For the best results, sew in place using a lockstitch and with no more than 12 stitches per inch (2.54 cm), and not less than 5/64" (2 mm) from the edge of the reflective fabric. For best results,

Screen Printing – Images may be printed on the surface of Scotchlite reflective material – fabrics. All inks should be continuously tested to ensure acceptable adhesion in the event of changes occurring in the manufacturing process or composition of the ink. Prior to printing,

Wiping the surface with a soft cloth lightly dampened with isopropyl alcohol may help ink adhesion. Printed areas will not be retro reflective.

Handling Precautions

    Most DM reflective material – fabrics contain an aluminum layer as part of their construction. Blemishing of this aluminum layer can occur if the front surface of the product has direct contact from hands during application and is then exposed to hot and humid conditions, greater than 26.7 °C (80 °F) and greater than 70% relative humidity, for a period of weeks. These blemishes do not affect performance of the product.

 

Care and Maintenance Instructions

 

Important: Test each application according to appropriate care instructions required for the finished product. Actual life of DM Reflective Material depends on cleaning methods and wear conditions.

1.Home laundering means using a top or front loading consumer type home washing machine with a consumer detergent at moderate water

temperatures (up to 60 °C , 140 °F). Garment finishing such as tumble drying at high temperatures can limit garment life and should be considered as part of the cleaning

2.Fabrics may be home washed. Dry-cleaning may also be used for certain products. If bleach is needed, only non-chlorine bleach should be used. High alkaline treatments such as stain removal products should not be used.

 

Product Availability

 

 

DM reflective material – fabrics are available in rolls with the following standard width and lengths:

 

Production Number	Roll Width	Width Tolerance	Standard roll length	Addition information
DM1901	100CM	+ -0.3MM	100M	MOQ 1000M

 

Important Notify

 

Storage and Shelf Life

 

   Store in a cool, dry area and use within two years after date of receipt. Store rolls in original shipping cartons. Return partially used rolls to the carton or suspend horizontally through the core. Cut pieces should be stored flat.

 

WARRANTY

 

    If any DM reflective material does not conform to this warranty, then the sole and exclusive remedy is, at DM’s option, replacement of the DM product or refund of the purchase price.

 

 PRODUCT USE

 

   1. Customer is solely responsible for evaluating the product and determining whether it is fit for a particular purpose and suitable for user’s method of application.

   2. Customer is solely responsible for determining the proper amount and placement of the product. While reflective products enhance visibility, no reflective product can ensure visibility or safety under all possible conditions.